UPS30105 - Meissner, MP3010, 10KVA, 70-90mins, 400V/400V

The UPS30105 is designed to provide high quality continuous power. Solid state true on-line technology is used in the MP3000 UPS with pulse width modulated (PWM) control to protect critical loads against power sags, surges, brown-outs and power failure. The MP3000 UPS inverter uses IGBT switching elements which together with PWM ensures close tolerance output voltage irrespective of variations in input voltage or output load. A fully intelligent monitoring system is incorporated on all MP3000 UPS systems, offering the ability to interact with customer alarms, serial interface allowing hard wired connection to a local computer and simple network management protocol (SNMP) compatible software available for most operating platforms.

  • Pulse Width Modulated (PWM) design using IGBT power devices
  • Extremely rapid response to step loads
  • Ability to handle switch mode power supplies and other loads (crest factor 3:1)
  • 3-Phase units incorporates three single-phase bridges allowing total 100% unbalanced loads but still maintaining very close individual phase voltage regulation
  • Advanced synchronising circuit eliminating hunting between mains and inverter
  • High overall efficiency
  • Extended back-up options are available
  • Designed for Genset compatibility
  • Robust, true on-line protection for computer and industrial application
Voltage3-Phase 400V, 4 Wire
Tolerance± 10%
Frequency50Hz ± 5%
Power Ratings (0.8PF lag)10kVA (8kW) 15kVA (12kW)20kVA (16kW)30kVA (24kW)
Voltage3-Phase 400V, 4 wire
Regulation No Load to Full Load±1% (steady state)
Regulation with 100% Load Application±5%
Regulation with 100% Unbalanced Load±1% Phase Voltage Regulation
Phase Displacements with 100% Unbalanced Load120° ± 2.5%
Frequency50Hz (60Hz on Request)
Free Running± 0.2%
Synchronised with Mains (Adjustable)2%
Overload Rating
1 Hour110%
10 Seconds150%
Crest Factor3:1
Total Harmonic Distortion<5% (typically 3% for linear loads)
Static Transfer Switch
Transfer TimeNo Break
Overload Rating 100ms1000%
Efficiency (Input to Output)Typically 87% at full load
Lightning ProtectionDesigned to withstand standard test impulses of 6kV and 3kA
Acoustic Noise Level<55dBA (Measured at 1 meter distance)
Operating Temperature Range0 – 40ºC
Relative Humidity (Non-Condensing)95%
Operating AltitudeUp to 2000m without derating
TypeStandard type Lead Acid Maintenance Free
Anticipated Life3 to 5 years depending on number of discharges
Standard Discharge Full Load (0.8PF lag)  10 min7 min8 min10 min
NoteLonger times available on request
Dimensions (mm) and Weight (kg)
Weight (approx.)408436508630
NoteAll weights and dimensions inclusive of standard internal battery
StandardVoltage free contacts available for remote monitoring by diagnostic software or a remote alarm panel
OptionalRelay contacts and remote alarm panel with AS400 interface
SoftwareAvailable on request
Scroll to Top