UPS0034INTEL - Meissner, MP103, 3KVA, 10-15mins, 230V/230V
- True on-line design
- Static Bypass Switch as standard
- Maintenance Bypass Switch
- High Frequency Pulse Width Modulated (PVM) microprocessor controlled
- High overload capability
- Very quiet operation (typically 50dBA and lower)
- Compact, slimline cabinet on castors for easy installation
- Totally short-circuit proofdesign
- Simple Network Management
- Protocol(SNMP) capability
- True on-line double conversion power protection for mission critical applications
The UPS0034INTEL incorporates a microprocessor controlled design using advanced high frequency Pulse Width Modulated (PWM) techniques. The result is a compact, low component count UPS providing unequaled reliability and performance with very low noise levels. The MP100 is packaged in an aesthetically pleasing cabinet with standard batteries for the 3KVA and 5KVA units housed within the UPS cabinet. A separate matching battery cabinet is available for extended discharge times. The MP100 Range is a true on-line design incorporating a Static Bypass switch as standard. In addition to this a manual Make-Before-Break switch is also provided for additional system reliability and ease of maintenance. The alarms and the ON/OFF switch are incorporated into the front facia of the unit. Standard protection is provided to reduce possible damage caused by lightning strikes.
| Model | MP103 Network | MP105 Network | MP103 | MP105 | MP105-3PH |
| Input | |||||
| Voltage | Single Phase 220V or 230V or 240V | 3 Phase 380/400V | |||
| Tolerance | +/-20% Note: Battery charging ceases at -15% | ||||
| Frequency | 50Hz +5% | ||||
| Output | |||||
| Power Ratings (at 0.6PF lag) | 3kVA (1.8KW) | 5kVA (3KW) | |||
| Ratings (at 0.8PF lag) | 3kVA (2.4KW) | 5kVA (4KW) | 5kVA (4KW) | ||
| Voltage | Single Phase 220V or 230V or 240V | ||||
| Regulation No Load to Full Load | +/-1 (steady state) | ||||
| Regulation with 100% Load Application | +/-3% | ||||
| Frequency | 50Hz or 60Hz | ||||
| Frequency – Free Running* | 50Hz or 60Hz, +/-0.2% | ||||
| Frequency – Synchronised with Mains (Adjustable)* | 50Hz or 60Hz, +/-2% | ||||
| Overload Rating – 1Hour | 125% | ||||
| Overload Rating – 30 Seconds | 200% | ||||
| Crest Factor | 3:1 | ||||
| THD at Full Linear Load | <3% | ||||
| Load PF Range | 0.7 lag to 0.9 lead within KW rating | ||||
| Static Transfer Switch | |||||
| Transfer Time | No Break | ||||
| Overload Rating 100ms | 1000% | ||||
| General | |||||
| Efficiency (Input to Output) | 84% | 85% | 84% | 85% | 85% |
| Lightning Protection | Designed to withstand standard test impulses of 6kV and 3kA | ||||
| Noise Suppression (EMI/RFI) | Complies with Telkom RFI regulations | ||||
| Environment | |||||
| Acoustic Noise Level (Measured at 1m Distance) | <49dBA | <51dBA | <49dBA | <51dBA | <51dBA |
| Operating Temperature Range | 0-40ºC | ||||
| Relative Humidity (Non-Condensing) | 95% | ||||
| Operating Altitude | Up to 2 000m without derating | ||||
| Battery | |||||
| Type | Standard Type Lead Acid Maintenance Free | ||||
| Anticipated Life | 3 to 5 years | ||||
| Standard Discharge | 12 min | 7 min | 7 min | ||
| PF lag at 0.6 | 15 min | 12 min | |||
| Times at Full Load 0.8PF (lag) | Note: Longer times to suit most applications | ||||
| Dimension (mm) and Weight (kg) | UPS Only | ||||
| Width | 260 | 260 | 260 | 260 | 260 |
| Depth | 620 | 620 | 620 | 620 | 620 |
| Height | 625 | 625 | 625 | 625 | 625 |
| Weight | 115 | 115 | 115 | 115 | 118 |
| Interfaces | |||||
| Standard | Computer Interface. True intelligent RS-232 | ||||
| Optional | Relay contacts and remote alarm panel with AS400 interface | ||||
| Software | Available on request / SNMP Capable | ||||
| Note: The MP100 units are also available as 110V input & output units | |||||