UPS003408 - Meissner, MP103, 3KVA, 220-300mins, 230V/230V

The UPS003408 incorporates a microprocessor controlled design using advanced high frequency Pulse Width Modulated (PWM) techniques. The result is a compact, low component count UPS providing unequaled reliability and performance with very low noise levels. The MP100 is packaged in an aesthetically pleasing cabinet with standard batteries for the 3KVA and 5KVA units housed within the UPS cabinet. A separate matching battery cabinet is available for extended discharge times. The MP100 Range is a true on-line design incorporating a Static Bypass switch as standard. In addition to this a manual Make-Before-Break switch is also provided for additional system reliability and ease of maintenance. The alarms and the ON/OFF switch are incorporated into the front facia of the unit. Standard protection is provided to reduce possible damage caused by lightning strikes.

  • True on-line design
  • Static Bypass Switch as standard
  • Maintenance Bypass Switch
  • High Frequency Pulse Width Modulated (PVM) microprocessor controlled
  • High overload capability
  • Very quiet operation (typically 50dBA and lower)
  • Compact, slimline cabinet on castors for easy installation
  • Totally short-circuit proofdesign
  • Simple Network Management
  • Protocol(SNMP) capability
  • True on-line double conversion power protection for mission critical applications
Model MP103 Network MP105 Network MP103 MP105 MP105-3PH
Voltage Single Phase 220V or 230V or 240V 3 Phase 380/400V
Tolerance +/-20% Note: Battery charging ceases at -15%
Frequency 50Hz +5%
Power Ratings (at 0.6PF lag) 3kVA (1.8KW)  5kVA (3KW)
Ratings (at 0.8PF lag) 3kVA (2.4KW) 5kVA (4KW) 5kVA (4KW)
Voltage Single Phase 220V or 230V or 240V
Regulation No Load to Full Load +/-1 (steady state)
Regulation with 100% Load Application +/-3%
Frequency 50Hz or 60Hz
Frequency – Free Running* 50Hz or 60Hz, +/-0.2%
Frequency – Synchronised with Mains (Adjustable)* 50Hz or 60Hz, +/-2%
Overload Rating – 1Hour 125%
Overload Rating – 30 Seconds 200%
 Crest Factor 3:1
THD at Full Linear Load <3%
Load PF Range 0.7 lag to 0.9 lead within KW rating
Static Transfer Switch
Transfer Time No Break
Overload Rating 100ms 1000%
Efficiency (Input to Output) 84% 85% 84% 85% 85%
Lightning Protection Designed to withstand standard test impulses of 6kV and 3kA
Noise Suppression (EMI/RFI) Complies with Telkom RFI regulations
Acoustic Noise Level (Measured at 1m Distance) <49dBA <51dBA <49dBA <51dBA <51dBA
Operating Temperature Range 0-40ºC
Relative Humidity (Non-Condensing) 95%
Operating Altitude Up to 2 000m without derating
Type Standard Type Lead Acid Maintenance Free
Anticipated Life 3 to 5 years
Standard Discharge 12 min 7 min 7 min
PF lag at 0.6 15 min 12 min
Times at Full Load 0.8PF (lag) Note: Longer times to suit most applications
Dimension (mm) and Weight (kg) UPS Only
Width 260 260 260 260 260
Depth 620 620 620 620 620
Height 625 625 625 625 625
Weight 115 115 115 115 118
Standard Computer Interface. True intelligent RS-232
Optional Relay contacts and remote alarm panel with AS400 interface
Software Available on request / SNMP Capable
Note: The MP100 units are also available as 110V input & output units
Scroll to Top