Servo Motors

Our Servo Motors are general purpose, permanent magnet servo motors. The ECMA series is plug-n-play with our A2 Intelligent or B2 Economy servo drives. This series of Servo motor is available from 50W to 15kW. The ECMA servo motor series is a state of the art Servo motor. Its segmented stator results in low flux loss. The case and bearings are designed to withstand 2.5Gs of vibration. Rare earth magnets, Neodymium-Iron-Boron (NeFeB) are used in the rotor for high torque to size ratio. Delta’s ECMA motor series is 10 pole design (unlike the more common 6 or 8 pole) and delivers low cogging and smoother motion than other servomotors on the market.

Part #RatingrpmDescription
Economic Servo Motors – 17 Bit
ECMA-C20401RS100W30000.32Nm, PCD: 46, Flange: 40×40, Shaft: 8
ECMA-C20602RS200W30000.326Nm, PCD: 70, Flange: 60×60, Shaft: 14
ECMA-C20604RS400W30001.27Nm, PCD: 70, Flange: 60×60, Shaft: 8
ECMA-C20807RS750W30002.39Nm, PCD: 90, Flange: 80×80, Shaft: 19
ECMA-C21010RS1.0KW30003.18Nm, PCD: 115, Flange: 100×100, Shaft: 22
ECMA-E21315RS1.5KW30007.16Nm, PCD: 145, Flange: 130×130, Shaft: 22
With built-in (24VDC) brake
ECMA-C20401SS100W30000.32Nm, PCD: 46, Flange: 40×40, Shaft: 8
ECMA-C20604SS400W30001.27Nm, PCD: 70, Flange: 60×60, Shaft: 14
High Resolution Servo Motors – 20 Bit
ECMA-C10604RS400W30001.27Nm, PCD: 70, Flange: 60×60, Shaft: 14
ECMA-C10807RS750W30002.39Nm, PCD: 90, Flange: 80×80, Shaft: 19
ECMA-C11010RS1.0KW30003.18Nm, PCD: 115, Flange: 100×100, Shaft: 22
ECMA-E11315RS1.5KW20007.16Nm, PCD: 145, Flange: 130×130, Shaft: 22
ECMA-K11320RS2.0KW20009.55Nm, PCD: 145, Flange: 130×130, Shaft: 22
ECMA-L11830RS3.0KW150019.10Nm, PCD: 200, Flange: 180×180, Shaft: 35
ECMA-L11845RS4.5KW150028.65Nm, PCD: 200, Flange: 180×180, Shaft: 35
ECMA-L11855RS5.5KW150035Nm, PCD: 200, Flange: 180×180, Shaft: 42
ECMA-L11875RS7.5KW150047.74Nm, PCD: 200, Flange: 180×180, Shaft: 42
ECMA-L1221BR311.0KW150070Nm, PCD: 235, Flange: 220×220, Shaft: 42
ECMA-L1221FRS15.0KW150095.40Nm, PCD: 235, Flange: 220×220, Shaft: 55
With built-in (24VDC) brake
ECMA-10817SS750W30002.36Nm, PCD: 90, Flange: 80×80, Shaft: 19
ECMA-11010SS1.0KW30003.18Nm, PCD: 115, Flange: 100×100, Shaft: 22
ECMA-E11315SS1.5KW20007.16Nm, PCD: 145, Flange: 130×130, Shaft: 22
ECMA-K11320SS2.0KW20009.55Nm, PCD: 145, Flange: 130×130, Shaft: 22
ECMA-L11830SS3.0KW150019.10Nm, PCD: 200, Flange: 180×180, Shaft: 35
ECMA-L11845SS4.5KW150028.65Nm, PCD: 200, Flange: 180×180, Shaft: 35